| |
|
|
Type: Residential gas-fired desiccant dehumidifier
- Use these dehumidifiers in: whole house up to 4000 sq. ft.
- Dehumidifiers water removal capacity (80F, 60% RH): 150 pints per day
- Casters No
- Dehumidifier operating temperature range 0 to 110 degrees
- Pump included Not necessary (moisture is exhausted outside)
|
- Prevents excess moisture
- Control the humidity during cooler periods without needing to turn the air conditioning on
- Uses a separate humidistat to control the humidity of the home independently of the central HVAC system
- Compact, energy efficient, and clean burning gas fired appliance
- Works in conjunction or independent of the HVAC system
- No condensing lines or buckets of water to deal with
|
- Installation is required
- Requires hookup to propane or natural gas
- Requires installation of exhaust to the outside
|
|
| |
|
|
Type: Electric whole house dehumidifier
- Use in: whole house up to 4000 sq. ft.
- Dehumidifiers water removal capacity (78F,60%RH): 200 pints per day
- Casters No
- Dehumidifier operating temperature range: 60° -110 ° F
- Pump included No. However, an optional external condensate pump is available for purchase below
|
- Combines desiccant dehumidification with dx cooling
- Prevents mold, reduces allergens, and protects furniture
- Provides year round humidity control
- Energy efficient
- Does not increase the temperature of the dehumidified area
- Operates separate from the air conditioner
|
- Duct runs cannot exceed .30 ESP (external static pressure)
- The technical nature of the unit requires installation by an HVAC mechanic
|
|
| |
|
|
Type: Compact Desiccant Dehumidifier
- Water removal up to 28.6 pints of moisture per day
- Casters No, but unit only weighs 27 pounds
- Temperature operation can operate down to 0 degrees
- Pump included/b> No, but is not necessary since the moisture is exhausted outside
|
- Compact design weighs only 27 pounds
- Solid construction built with rugged aluminum frame and panel construction
- Uses desiccant technology so it is able to remove moisture from the air regardless of the air temperature and humidity
- No buckets to empty or hoses to hookup since the moisture is exhausted outside
|
- Require professional installation including ductwork to exhaust the air outside
|
|
| |
|
|
Type: DH-250 & DH-250P light industrial and commercial desiccant dehumidifier
- Water removal: Up to 192 pints per day
- Casters: Yes for the 250P.
- Temperature operation: 0 to 110 degrees
- Pump included No but is not necessary.
|
- Dehumidify in conditions of low temperature and humidity
- Uses desiccant technology moisture is exhausted outside so there are no buckets to empty or hoses & pumps needed
- Two blowers one to supply the dried air and one to exhaust the moisture
- Is suitable for a wide range of applications including storage rooms, vaults, small manufacturing and industrial processing centers, and restoration
|
- Requires ducting in of air from the room and exhausting the moisture to the outside
- Professional installation required
- Can add a 20 degree heat load to the supply air
- Duct runs cannot exceed .30 ESP (External Static Pressure)
|
|
| |
|
|
Type: Compact Desiccant Dehumidifier
- Water removal over 2 pints of moisture per hour
- Casters No, but unit only weighs 37 pounds
- Temperature operation can operate down to 0 degrees
- Pump included/b> No, but is not necessary since the moisture is exhausted outside
|
- Compact design only weighs 37 pounds
- Solid construction sturdy aluminum frame and panel construction
- Uses desiccant technology so it is able to remove moisture from the air regardless of the air temperature and humidity
- No buckets to empty or hoses to hookup since the moisture is exhausted outside
- High capacity has twice the capacity of the DH 50 model
|
- Require professional installation including ductwork to exhaust the air outside
|
|
Learn more about Dehumidifiers
